Extruder Twin Screw Reconditioning
NOTE: If sending in a screw for inspection that has plastic
resin on it,
then a MSDS for the resin MUST accompany the screw.
We recondition Twin Extruder Screws for the following brands:
JSW (Japan Steel Works)
In most cases, twin screws can be rebuilt at a considerable cost savings over replacement. Individual elements can be replaced as necessary. In addition, we can change element order, add or eliminate mixing and kneading sections and provide general optimization of twin screw profile. Plastic Services & Equipment can also check twin screws for shaft straightness and shaft twist.
Replacement elements can be manufactured from D-2 Heat Treated Steel, CPM-9V Heat Treated Steel or CPM-10V Heat Treated Steel for maximum abrasion resistance.
Process Improvement and Enhancement:
When having problems with increased scrap and decreased throughput, PS&E is your answer. Our engineers have over 50 years of combined twin screw experience. We have the capabilities to understand your unique application and to assist in the design that will yield the highest throughput with the best melt quality. For high shear, low shear, large throughput and high RPM speed, we have your answers.
Incoming Freight Policy:
To help prevent loss during shipping, please attach a copy of your packing slip to the part itself, as well as the outside of the box.
Plastic Services & Equipment will hold parts sent in for inspection for a maximum period of six (6) months, after which the parts will be scrapped at our warehouse (unless prior arrangements have been made).
Parts to be returned to you will be shipped freight collect.
All incoming parts for rebuilding, repairs, etc. must be shipped to PS&E "Freight Prepaid" in a strong, reusable container (see examples below). The Bill-of-Lading should be marked: MACHINERY PARTS, STEEL, CLASS 85, FREIGHT PREPAID. Smaller items weighing 70 pounds or less should be shipped via UPS Prepaid. In the event that items are received "Freight Collect", our Receiving Department must obtain approval prior to accepting the shipment. If the shipment is accepted, you will be billed for the freight plus a $35.00 Processing Fee. PS&E reserves the right to refuse the shipment. Terms for Freight Charges: Net 10 Days. A copy of the original freight bill will be sent with the invoice.
Your Next Barrel or
Screw Is On Our Shelf...
Call Today! 800-627-1033
A Quote |
Place An Order | Product
Barrels & Screws | Electrical Products | Hose & Fittings | Molding Accessories
About PS&E | Terms & Conditions | Credit Application
Contact Us | Online Catalog
PLASTIC SERVICES & EQUIPMENT
Fax: 800-482-4059 | E-mail: firstname.lastname@example.org | Address: 7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Contact Webmaster regarding content or link problems.
Copyright 1997 - 2022. Plastic Services & Equipment. All rights reserved.