PLASTIC SERVICES
& EQUIPMENT

Home  |  Products   |  Brands  |  Place An Order  |  Request A Quote  | Site Map  |  Contact Us

 

Alpine - American Granulator Knife
Resharpening Services

 

     Before

Resharpened Blades     After

 

 



Improve Your Granulator's Overall Performance and Save Money!

The condition of your grinder bed knives and rotating knives has a key performance effect on the grinder.  Having blades that are properly sharpened will increase the efficiency (cutting rate, decrease fines, decrease noise).

Almost all makes and models of blades can be resharpened at a significant cost savings over new blades.


  • Abbe
  • Albis-Mazza
  • Alexendarwerk
  • Alsteele
  • Alpine
  • Alpine-American
  • Amacoil
  • Amacoil-Polymer
  • ARP
  • Ball & Jewell
  • Ball & Jewell Sterling
  • BlackFriars Small Mills
  • Brabender
  • Buss-Condux
  • Cincinnati
  • Colortronic
  • Conair
  • Condux
  • Corcoran, R.S.
  • Cumberland
  • Dreher
  • Engelsmann
  • Entoleter
  • Falzoni
  • Flinchbaugh (FPI)
  • Follceri
 
  • Foremost
  • Gloucester
  • Granutec
  • Gruendler
  • Hamilton
  • Herbold
  • Hoover Universal
  • Horai
  • Husky
  • Hydreclaim
  • IMS
  • L & R
  • Leistritz
  • Maguire
  • Maku
  • McCosh
  • Meccano-Plastica
  • Mitts & Merrill
  • Moser
  • MPG
  • Nelmor
  • Nelmor-Pelletizer
  • Nicko
  • Pallmann
  • Pax
  • Polymer
  • Previero
  • Primotechnica
  • Process Control
  • Rainville
  • Ramco (R&A)
  • Rapid
  • Rapid-American
  • Rotogran
  • Satrind
  • Scholberg
  • Sprout Bauer
  • Sprout Waldron
  • Sterling
  • Taylor Stiles
  • Temptek
  • Terrier
  • Thoreson-McCosh
  • Tria
  • Triple S
  • Van Dorn
  • Warner-Technik
  • Weima
  • Weldon
  • Williams
  • Wittmann
  • Woric
  • Wortex
  • Young Machine
  • Zerglomat
  • Zerma




 

Stationary Bed Knives and Rotating Fly Knives

  • Stationary knife blade can be sharpened individually
  • Rotating knife blades should be sent in sets for matched grinding and balancing
  • Specify machine make and type
  • Specify any minimum resharpening dimensions
  • Quick turnaround

 

 

 

 

 

Conair/Wortex Fly Knives

  • Diameter of the cutting circle remains unchanged
  • Special diamond grinding tools sharpen the underside of insert only
  • Includes sharpening of all 3 inserts of each rotary fly knife

Conair/Wortex Fly Knives Before Sharpening

Before

 

 

Conair/Wortex Fly Knives After Sharpening

After

 

COMMON GRANULATOR PROBLEMS

SYMPTOM

POSSIBLE PROBLEM

CORRECTIVE ACTION

 

 

 

Poor quality regrind - high % of fines

Dull Knives

Sharpen or replace with new

Increased vibration

Knives not properly gapped

Re-gap knives

Increased noise

Plugged screen

Clean screen

 

Rotor speed is to high

Change pulleys and/or motor

 

 

 

Reduced throughput

Dull knives

Sharpen or replace with new

 

Knives not properly gapped

Re-gap knives

 

Plugged screen

Clean screen

 

Rotor speed is too high

Change pulleys and/or motor

 

 

 

Rotor stalls

Dull knives

Sharpen or replace with new

 

Knives not properly gapped

Re-gap knives

 

Plugged screen

Clean screen

 

Overloading the machine

Reduce the feed rate

 

Loose or worn belts

Tighten or replace

 

 

 

Motor will not start

Safety limit switch open

Check all limit switches

 

Blown fuse or breaker

Replace or reset

 

 

 

Regrind collection bin overfill

No high level indicator

Install

 

High level indicator broken

Replace

 

Vacuum line plugged

Check vacuum evacuation system

 

 

 

 



 

ABBE

#000, #00, #0, #1, #2

ALBIS-MAZZA

25/40

ALEXANDERWERK

ROTARY

ALPINE

B40/63

ALPINE-AMERICAN

28/40RO, A32/40RO, 40/63RO, B40/63

ALSTEELE

6X6, 6/8,10X22, 10X17, 10X22, 12X17, 14X22, 10X9, 14X17, C124, 10X9, 18X10, 9X11, 12X13, 1236, 1337, 11X13, 10X12, 10X13, 2449, 2436, 16X39, 14X26, 14X51, 1225, 12X25, 12X14, 11X19, 12X18, 10X18, 7X18, 9X36, 12X36, 24X36, 8X20, 15X21,1224 HOG, 12X24, 12X48, 13X49, 9X24, 13X25, 1422, 30X48, 6P6

AMACOIL

600

AMACOIL-POLYMER

8X8, GUO808, GU88, AG-88, GU808, AG-1010, HMG1010, 1010-A, AG/HMG1010, GU1421, GU1427, 1627, GU1415, GK1000, HMG2652

ARP

TWIN SHAFT SHREDDER CS3002

BALL & JEWELL

M68, M88, M75, HAF6885SC, DK88, M100, 4219M, HAF685SC, 301-3 STD. IDEAL, MD810, M810, M110, 10", MB150, MD812, IAF812P, HAF812SC, HAF812P, DK812, M200, IAF812D, M812, LB1212, DK1212, MD1212, BP1212S, MA1212X, 1212SX, MB1212X, 12", GAF812SCSX, CG812SCX, 1014, MD1216, CG1216SCSX, HAF1216C, M300, DK1216, M816. LB1216, M816, 1216 SPL, MB520, MB250, 451, CG1620SX, CG1620SCSX, MD1640, M400, M820, MD1620,  NO. 1/2, MD1220, 20", GK10022, NO. 1, AS-24 STEEL, STEELMSTR 24, M500, KT-1248-X, NO. 1.500 5/SET,NO. 1.500, HD1652, HD1626, MD1626, 2026, MD1620 5KN ROTOR, CG2026SX, 2-28, 1632, HDB 303SX, 16 x 2.88 x .750, 15.995 x 2.06 x .750

BALL & JEWELL STERLING

8X12, HAF-812-SCX

BLACKFRIARS SMALL MILLS

100/80 LARGE MEDIUM HEAVY DUTY, 30/30 MEDIUM DUTY, 40/40 MEDIUM DUTY, 62/60 LARGER MEDIUM HEAVY DUTY, 80/50 MEDIUM, 60/40 MEDIUM

BRABENDER

S10/9GF

BUSS-CONDUX

CS1000-111

CINCINNATI

 

COLORTRONIC

M103, M200/300

CONAIR

MGK400, MC-32, MGK400.175, 9X10, X H6910, W-450, 8X10, 12X14, 12X24, 721978, 1412, 14X20, 16X24, G1630, G1630-20, G1630-21

CONCORAN, R.S.

SG-200, SG-500, M8-18, SG-100

CONDUX

CS150/440, CS150/400, CS203/220-3A, CS320/350-4, CS300/600-11-A, CS50/100 N1, CS300/400, CS450/600-AS, CS300/220-111-A, CS800/1000-111A, CS300/600-4 WK

CUMBERLAND

CHOPPER, #0, 24M, #.500,184 SPL, 1010 AUGER, 10, 185, 710, 810, 1, 190, 184, #1.500 CHEVRON, 812 ,284, 285, 2 UC, 1013 USE FOR 2KN, 3KN ROTOR, 1212 GRAN, 2KN USE WITH 3KN ROTOR, 1212, 2, 290, 1212 PI, 78, 780, 384, 484 SPL, 484 SPL CHEVRON, 484-3KN, 484 TWINSHEAR, 3, 1416, 4, 6, 1416,  18,  584,  CHEVRON,  TWINSHEAR, 585, X1000, 1220, 1420, 14X12, 5, 20, 1837, 37, 1524-24, #80, (B58627)24B-MED, #80-85, 24B, 24 HS ROTOR, 2415 HOG, 24 RR, 1426-I, 1-5 CUT/BLWR, 684 SPECIAL, 3250, 2815H, 28H, 1836, 1826 I, 1828-28, 1828-28B, 24H, 24T, 24X28, 87039-1 CHEVRON, #30, 30T, 56T, 4284, PELTZ, 1837-37, 8185, (50635-2), (3KN ROTOR) 37H, 37B, 37B SPECIAL FOR P.W. PIPE, 1737-37, PELT 2 MFG, MA INDUSTRIES, IKS PRINT, 1462, 3715, 3715H, 1462 SOLO CUP, 43, 5018, 50H, 50F, 12X24, 50F, 2050-50, 50T, 50B, PCPR750 MA IND., 2050-50 SPECIAL AMOCO FOAM, 2050-50B, 1456, 66T,PCPR737C MA IND., AUGER FED, TANGENTIAL, LARGE TANGENTIAL, T SERIES, 65, 1000, 1200X, 1600X, LB, S, A, B, X, C, 3200, H, 2000, CPM, 1800, 1900, CUM02015L, CUM02010R, 1012, 1215, 43C, 62B

DREHER

S34/52, S34/41VS, ES60/50, S26/26GF, S26/41GF, S34/52GF, S34/100GF

ENGELSMANN

SHREDDER

ENTOLETER

24", 37", 12X24

FALZONI

FB6, FB10-C, FBL800, FBL400

FLINCHBAUGH (FPI)

1437, 79,  911

FOLLCERI

100X800X600, 100X500

FOREMOST

SG-80, SE300, 56-80, 2A-1, 2A-3, 2A-4, 5C-1, 2A-2, Y8301-63C, 1008MS, HD1, HD3, HD5, QG1010, MS10, MS20, 10X11, X7301-15, 56100, 56400, SRG810, X7301-14, SG400, SHD-5, HD5B, MS20, SK810, 6A, 6B, HD8, HD6, HS18, MS18, SCMS18, SNS18, SG300, QG1814, SHD8, HD7, 6-B, 6-A, 1624, 3C-2, 3E-1, MS12, X7202-30, S3E-1A, 11 1/2" HS,  PIPE CUTTER, PL5431, 13 1/2" HS, DSC-14, S30, S45, HD4, S30, PG2415, 545, 230, PL2415, H04, 3030, 3048, HD2, 2H, SG500, QG1410, MS14, MS28, HD44, 15 1/2" HS, 5CL, 5C1, 16" SHEAR, 6X8, 68BPS, 1012BL10, BP10, 1416BP20, 1416BPO20, 1218, 12X18, 1420BP, BP30, 12X25, 250, 50TP10, HD60, 1428, B21005024, B21005023, 1416BP15, 30TD10

GETECHA

MID RANGE CENTRAL GRANULATOR, LARGE VOLUME PARTS, HEAVY DUTY, GRS SERIES

GLOUCESTER

 

GRANUTEC

66(A66-0015-2), 66(A66-0010-3), 810-AM, A810-002-3, 810, A810-0003-2, 1012TFG, 1012HN15, A1216, TSG1624, 1616/1612, P.E.I., TSG1424-50, TSG1624, G1424-0228-3, TFG1212

GRUENDLER

24", 12X24

HAMILTON

45-25-7D, UP755, 60-35TD

HERBOLD

SML 20/20F31, SML30/80-S3-1, SM 45/80 -HS-2, SML 30/50-S3-2, 45/100, SMS 80/120, (10-205-203) (102-04-201), (10-204-104), SMS 80/60

HOOVER UNIVERSAL

 

HORAI

U-3027

HUSKY

48 HEAVY DUTY, SUPER 48 PRIMARY, MODEL 24

HYDROCLAIM

8X8, 812, 1218 (OEM), 1218 RBI, 1225

IMS

AS86-H, A86-SP, AG-86-KJ-SC, AG-86-6-SC, AG-86-8SC, LP86, A-86, AG-86-6, AG86-8, A-187-SC, A-144, A-144-3., A-144-SC, A-288-SC, AGA-120-SC A-120-SC, AUG-120-SC, A120SC, LP120SC, LP144SC, LP288SC, LP86C, 2031P, 2049, 2049 SERIES M1, M2, M3, G1, G2, G3, K3, G466, 2069, XD1, 3046, K4, G4, M4, 3040SP, GLP2086, GLH2086, GAU26, GAA16CF, GAU46, 1030LB-SPH, 1030LB, 1030CP, CPGAU26, 2173, K1710K-9, CPGAA16CF, K1085, K6, AGLU-4173, GLS-4173, GHU4173, GHS4173, A86SPO, G566R, 285-2120, M5, XD2, 2144SPO, 12" AUGER, M10, 25P, K5, LP144-MH, 2288SPBV, G866R

L & R

 

LEISTRITZ

 

MAKU

F21

MAGUIRE

RADIAL R9, R18, SHUTTLE S-20, S-30, S-60, HEAVY DUTY 2436, 2454

McCOSH

 

MECCANO-PLASTICA

CS 25/40 SL

MITTS & MERRILL

13CSD, 14CSF, 15CSH, 8X10, 10X12, 14, 1635

MOSER

KG35/42

MPG

UP735, 712, IM-75, MP-1114

NELMOR

AN67, G66M1, AN88M, AN88MS, L888M, G2436M2, AB1010M, 810VL, RG810M1, AN1010MS, GA1010M2, KB1010M, 810RG11, G810M1, G6310, G1012M1, RG1012M1, G10-120, 1012ARG11, AG61012M1, G1012LS, G1224, AN8X8M, GBB-1, G1424 M1-MB, G2024MB, G1448-M1, G2436M-1, G3036M-1, G1454MB, G2054MB, G2436M-1, G3036M-1, G2436M-2, G2056, G1436MB, G3072MB,   G3048MB, G1436MB, G2036MB, G3072MB, G3048MB, G1436MB, G2036MB, 24X36, 1448-B, G1424MB, 6X7 AUGER, G1425B, G1215M-1, G16295M-1, G12295M-1, G1830M, G2045M-1, G1416M-1, G1220M-1, G1620M-1, G1820M-1, RG10M-1, G1436MB, WG-600, G1424MB, G1424M-1, G1448M-1, G2024MB, G1448M-1, G6012M1, 2030, 2045, F512, G3036MR, G3036MZ (OEM), G3036M2, G3036MZ, 3030HD, 2056, 2456MB, 1220 (SEM), SEM 22 DIS, MINI HOG, G1220MH1, 1634, WG6000, 93072M, G1224P, G1448, 14X24, G1424MND, RL450, 3030HD, HOLD DOWN BAR 1424, G810LS, 810RGII, G1215LS, 1215RGII, G12215M1, RG1215M1

NELMOR PELLETIZER

G810, G5-1480, G5-1485, G1012, G10-2121, G1215, G15-1557, G12295, AG32-1100B, G2030, G1220, G20-2290B, G1224, G18-0063B

NICKO

14x20

Pallmann

PS816, PS4-5, PS4-7 1/2, PS300/300-F2-S3, PS8-6

PAX

G12 SHRED RUBBER

POLYMER

.68, 68 SILENCER, 68 SPECIAL MODIFIED, 88, 1010A, 6438SC, 912, 912 SPECIAL, 912LL SPECIAL,
1225, 1116, 1116 (OLD) SPECIAL, 1116 (NEW) SPECIAL, 1120, 1020 SIL, 2040, 1620, 1526, 1426 LOBOY, 32X74, 32X56, 1632 SIL

PREVIERO

MU510PRT, MU508N5, MU708, MU712, PR712

PRIMOTECHNICA

R20076, SB612

PROCESS CONTROL

1216, PC20, LODI, K0141, 1218, PC30, 4GR-AD0147, 1426, 1527

RAINVILLE

1011, 1015, 1415, 1419, 28 SLS

RAMCO (R & A)

1012, 1012 Double Edge Rotor, 1012 Rotor, 1012 Bed Knife, 1030, C1030, 1418H, 8X10, 1424W, OEM PRINT 8X10, B1012-R6, B1012-M17, 14X18 (LT DUTY), 14X18 & 1436 (HEAVY DUTY), 1418I, 2436, 1527, 1527 SPECIAL

RAPID

20" Dual, 912, 912C

RAPID-AMERICAN

GK20, 158, GK205, 79C, K, GK2218A, 79MS, 1012K, 1012, GK3026, GK1000, 2442 HOG, 3-10556 (HD ROTOR), GK1000R, 600 "V", 600C, GK640, GK640 (MOD), GK600, GK625, 1224C, GK650, GK600SK, 600 "U", GK100C, 912C, 75C, 50C, 150C, 250E, 3023KU, 75E, 1831, GK8045, 1831, 1831K, 1830KU, 1418, GK4535KU, GK300, 1824K, 6045K, GK2218, 1528L, GA2B2, MVL10, 1618RO, 35, 150, 80, 6090, 4590, 2690, 2660, 2034, 2048, 79K, 912, GK50, GK3026K

ROTOGRAN

SHREDDER K10/25

SATRIND

SHREDDER K10/25

SCHOBERG

TWINSHAFT SHREDDER ES 60/85

SPROUT BAUER

12X15, DSF1512

SPROUT WALDRON

PC103, PC103-1, 1524

STERLING

BP2000, BP3200, HDG, BP2400, BP2039HD, BP2056HD, TG1400

TAYLOR STILES

G7, 012, 536, 1236, 20, 520, 411, 224, 624, 34, 536

TEMPTEK

88EM, 1010EM, 12216EM, 1420EM

TERRIER

G300/400

THORESON-McCOSH

Giant

TRIA

BM, X7, 500, 32-25/TD, g3/G2, 46-25/TD, 60-35/TD, 550, 400

TRIPLE S

24, 48, Face Cutter

VAN DORN

G200

WANNER-TECHNIK

15.13 EZ-SS

WEIMA

NZ-4S

WELDON

A1250B, A1250, JW-26A, JW260B, A-400, JW-500, AS50-1, A-1000, JW-400

WILLIAMS

3080 NIFE HOG SHREDDER-GRANULATOR

WITTMANN

COMPACT, HEAVY DUTY, AUGER, SHREDDER

WORIC

FL816

WORTEX

JC5l, JC-5, LP330, DC10A, JC10a, LP400, JC10l, H811, FL816, 1012, XL10, LP350, XL20, UP740D, MS-810, WD4399, MC40, WD2153, MC32H, FL1216, FL16, 11216, MS10, UP757, UP957, HD2020, UP755, WD1610, 2020HS, HD205556, LC45, 2056, 2028, MC28, WD3445, WD2336CS, WD2336, GS20, UP730, HS2030, UP735D, HS755D, UP750D, 6250, WD1050, HS2050, 755, 755D, WD1938, UP75D, 1635-1, 1635-2, LP500, XC15, XL1500, UP755D, S-10

YOUNG

FL-A, KJZ-1, SHK, YK, KJZ-40, KJZ-200, KJZ/HYL-10, HJZ/HYL-50, KJZ/HYL-100, KJZ/HYL-200, H1723, 2436

ZERGLOMAT

 

ZERMA

GS300/200, GS500/800W, GS300/400, ZVS GSL300/400, GS300/200, GSL180

 


Click here for information concerning 
New Replacement Granulator Knife Blades.


Your Next Barrel or Screw Is On Our Shelf...
Call Today! 800-627-1033

Home | Request A Quote | Place An Order | Product Index 
Barrels & Screws | Electrical Products | Hose & Fittings | Molding Accessories 
About PS&E
| Terms & Conditions | Credit Application
Contact Us | Online Catalog


PLASTIC SERVICES & EQUIPMENT


Fax:  800-482-4059
| E-mail:  sales@servicesforplastics.com | Address:  7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Contact Webmaster regarding content or link problems.
Copyright 1997-2024 | Plastic Services & Equipment. | All rights reserved. | Privacy Policy