PLASTIC SERVICES
& EQUIPMENT

Home  |  Products   |  Brands  |  Place An Order  |  Request A Quote  | Site Map  |  Contact Us

 


PPT Series (Polyethylene)

Pump Tank Stations

 






The space efficient PPT Series Pump Tank Station utilizes a vertical 
dimension for water storage, and an integral pump platform deck to 
minimize floor space footprint.  The polyethylene reservoir is rust and 
corrosive resistant and will not degrade. The PPT Series is designed 
and engineered for round-the-clock operation with minimal services, 
providing maximum return on investment. 

 

 

Features:
  • Capacities From 450 to 3200 Gallons
  • Tower or Chilled Water Systems
  • Flows From 40 to 1250 GPM
  • Rotationally molded linear low-density polyethylene construction
  • One piece, seamless, cylidrical shape reservoir
  • Water-level Control
  • Pre-wired Magnetic Pump Motor Starters
  • Structural Steel Deck for Pump Mounting
  • Flexible Connections
  • System can be customized to meet any needs

The PPT Series Pump Tank Station is space efficient, utilizing and vertical dimension for water storage and an integral pump platform to its minimize floor space footprint. 

High flow, high turbulent pumps offer maximum heat transfer across the process.  A paten pending polyethylene reservoir is a seamless, one-piece design that resists rust, corrosion, and will not degrade.

Safety features include overload protection and thermostat control of the tower fan where necessary.

The centrifugal, motor driven pump has flexible connections, a bronze impeller, and suction/discharge service vale kits.  The structural steel pump deck mounting is sturdy yet minimizes the floor space necessary for the unit.

All components are shipped loose and field assembled.  All drawings are supplied for easy assembly.

Available options include; a standby pump and discharge manifold with isolation valves, and a pre-wired control cabinet for starters and controls.

PPT Series Pump Station shown w/ pumps, valves, and motor starter all mounted and wired.


PPT SERIES SPECIFICATIONS
 

PPT-450

PPT-850

PPT-1600

PPT-3200
WATER
CAPACITY
(Gallons)
TO OVERFLOW 450 850 1600 3200
TOWER DRAIN 225 425 800 1600
CHILLED WATER 350 675 1200 2400
CONNECTIONS WATER MAKE-UP 1" 1" 1" 1"
TANK DRAIN 1-1/2" 1-1/2" 1-1/2" 1-1/2"
TANK OVERFLOW 4" 4" 6" 6"
DIMENSIONS HEIGHT 60" 72" 96" 96"
WIDTH 48" 60" 72" 160"
DEPTH 50" 62" 74" 74"
DEPTH w/PUMP BASE 36" 36" 48" 48"
WEIGHT DRY 860 lbs 1590 lbs 2243 lbs 4636 lbs
OPERATING 2750 lbs 5160 lbs 8963 lbs 18076 lbs
MAXIMUM 4640 lbs 8730 lbs 15683 lbs 31516 lbs
SHIPPING 860 lbs 1590 lbs 2243 lbs 2636 lbs

P SERIES PUMP SPECIFICATIONS
Process/Standby Pump Model
  PP-2 PP-3 PP-5 PP-7.5 PP-10 PP-15 PP-20 PP-25 PP-30 PP-40 PP-50 PP-60
PUMP HP

2.0

3.0 5.0 7.5 10.0 15.0 20.0 25.0 30.0 40.0 50.0 60.0
GPM/PSI 40/40 60/60 90/60 150/60 210/60 360/60 405/60 525/60 600/60 900/60 1000/60 1250/60
FULL LOAD
AMPERAGE 1
230/3/60 6.8 9.6 15.2 22.0 28.0 42.0 54.0 68.0 84.0 104.0 130.0 154.0
460/3/60 3.4 4.8 7.6 11.0 14.0 21.0 27.0 34.0 42.0 52.0 65.0 77.0
575/3/60 2.7 3.9 6.1 9.0 11.0 17.0 22.0 27.0 32.0 41.0 52.0 62.0

TP SERIES PUMP SPECIFICATIONS
Tower/Evaporator Pump Model
  TP-2 TP-3 TP-5 TP-7.5 TP-10 TP-15 TP-20 TP-25 TP-30 TP-40
PUMP HP

2.0

3.0 5.0 7.5 10.0 15.0 20.0 25.0 30.0 40.0
GPM/PSI 60/30 90/30 210/30 255/30 405/30 525/30 810/30 900/30 1100/30 1750/30
FULL LOAD
AMPERAGE 1
230/3/60 6.8 9.6 15.2 22.0 28.0 42.0 54.0 68.0 84.0 104.0
460/3/60 3.4 4.8 7.6 11.0 14.0 21.0 27.0 34.0 42.0 52.0
575/3/60 2.7 3.9 6.1 9.0 11.0 17.0 22.0 27.0 32.0 41.0

1
Full Load Amps shown. No allowance for in-rush. Full Amps are higher than Run Load Amps and must be used for sizing disconnects and supply wiring






Your Next Barrel or Screw Is On Our Shelf...
Call Today! 800-627-1033

Home | Request A Quote | Place An Order | Product Index 
Barrels & Screws | Electrical Products | Hose & Fittings | Molding Accessories 
About PS&E
| Terms & Conditions | Credit Application
Contact Us | Online Catalog


PLASTIC SERVICES & EQUIPMENT


Fax:  800-482-4059
| E-mail:  sales@servicesforplastics.com | Address:  7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Contact Webmaster regarding content or link problems.
Copyright 1997-2024 | Plastic Services & Equipment. | All rights reserved. | Privacy Policy