| Camie
2000 TFE-Coat All Purpose Dry Film Spray
2000 forms a bonded Teflon® coating that reduces friction on most
substrates and prevents a buildup of products on chutes, hoppers, guide
rails, etc. It is a dry lubricant and has applications where silicones or
other wet lubricants cannot be used. Once sprayed on, and after air
curing, it forms a true, dry-to-the-touch Teflon® coated surface.
Packaging: Sold in 20 fl. oz. cans (15.5 oz. net weight); 12
cans/case (not available in bulk). |
|
|
Camie
303 Spray Adhesive
Soft, Pliable Bond for a
Wide Variety of Materials
303 is designed to work well on urethane foam, fabric, metal, supported
vinyls, wood, paper and leather. It is orange in color and offers a unique
lace spray pattern for low soak-in on polyurethane foam. It offers a soft
pliable bond and a better build of glue at the bond line. It is extremely
economical compared to other brands.
Packaging: Sold in 24 fl. oz. cans (17 oz. net weight); 12
cans/case (not available in bulk). |
|
|
Camie
7272 Anti-Static Spray
7272 helps reduce static electricity generated by friction and low
humidity conditions. It is chemically inert, colorless and non-flammable
for uniform, easy application.
Packaging: Sold in 20 fl. oz. cans (13 oz. net weight); 12
cans/case (not available in bulk). |
|
|
Camie
1080 Paintable Mold Release
1080 is our most popular all-purpose paintable release agent. It's economical to
use, eliminates costly cleanups, and is universally accepted by injection, extrusion and
compression molders, permitting high speed production. Does not build up and does
not interfere with painting, hot stamping, vacuum metalizing or gluing. It can be
used on most substrates including rubber, acrylics, polyesters, polystyrenes, and
cellulose.
Packaging: Sold in 20 fl. oz. cans (11 oz. net weight); 12
cans/case (also available in bulk). |
|
|
Camie
888 Silicone Mold Release
888 is our most popular silicone release agent, with a 3% silicone content and a dry type
spray pattern that is useful on most plastic resins, including acrylics, celluloses, ABS,
polystyrenes, polyesters, and rubber. Odorless and nonstaining. The active
ingredient complies with FDA regulations.
Packaging: Sold in 20 fl. oz. cans (11 oz. net weight); 12
cans/case (not available in bulk). |
|
|
Camie
980 Urethane Release Agent
980 is a silicone release agent that is useful for rigid polyurethanes, epoxies,
polyesters, TPR and other thermosetting resins.
Packaging: Sold in 20 fl. oz. cans (12.75 oz. net weight); 12
cans/case (also available in bulk). |
 |
|
Camie
1380 Non-silicone Paintable Mold Release
1380 is recommended as an all purpose release agent that can be used on all of the same
plastic resins as 1080. It allows for post-decorating, painting and gluing and has
as its active ingredient, lecithin, which complies with FDA regulations.
Packaging: Sold in 20 fl. oz. cans (11 oz. net weight); 12
cans/case (also available in bulk). |
|
|
Camie
1480 All Purpose Paintable Mold Release
1480 is a unique paintable release agent that contains a very efficient release polymer
that allows the user to post-decorate, hot stamp, paint, or glue finish plastic parts.
Packaging: Sold in 20 fl. oz. cans (13 oz. net weight); 12
cans/case (also available in bulk). |
 |
|
Camie
A1000 Dry Paintable Release
Using Zinc Stearate? Try A1000 - a PTFE dispersion of a white, waxy, low molecular
weight polymer. Useful for high temperature compression molding. Works well on
epoxies, nylons, polyurethanes, polystyrenes, acrylics, polypropylenes, phenolics and TPR.
Parts may be post-finished, as A1000 does not transfer to the part.
Packaging: Sold in 20 fl. oz. cans (13 oz. net weight); 12
cans/case (also availabe in bulk). |
|
|
Camie
3015 Mold Saver
3015 protects against rust and corrosion on all metal surfaces exposed to weather and
moisture and leaves a barrier that lasts up to six months for indoor storage of bare metal
parts. This industrial strength mold saver fights oxidation and neutralizes
corrosive deposits, displaces moisture and lubricates. 3015 is a transparent, oily
film that is used in the molding industry to protect molds during shut-down time. It
does not require a separate cleanup step. In most cases, molds can be put into
production direct from storage. Once burned off, bleedout from ejector pins is
minimized.
Packaging: Sold in 20 fl. oz. cans (12.5 oz. net weight); 12
cans/case (not available in bulk). |
|
|
Camie
100 Heavy Duty Silicone Lubricant
100 is a multipurpose, 6% high viscosity silicone spray for general maintenance
applications that can smooth the flow of production by reducing friction and binding.
It can be used in molding, cutting, sawing, and slicing operations where friction
or sticking decreases output. An excellent product to prevent the formation of rust,
static electricity, or the buildup of inks and adhesives. It is odorless and
stainless in most applications.
Packaging: Sold in 24 fl. oz. cans (15 oz. net weight); 12
cans/case (not availabe in bulk). |
|
|
Camie
999 Dry Silicone Lubricant
999 is a 4% dry, all purpose lubricant that can be used to eliminate squeaking and stop
sticking in almost any application. It is especially recommended for plastic and
painted surfaces. It is economical to use and has active ingredients that comply
with FDA regulations.
Packaging: Sold in 18 fl. oz. cans (13 oz. net weight); 12
cans/case (also available in bulk). |
|
|
Camie
22/60 Contact Cleaner
22/60 does not contain any chlorinated solvents, yet shows very good contact cleaning
properties and also can be used to remove and clean grease stains from most fabrics
quickly. 22/60 can also be recommended for ink, oil, dirt, and some paints.
Always test this product in a hidden area to determine its effectiveness on your
application.
Packaging: Sold in 16 fl. oz. cans (10 oz. net weight); 12
cans/case (also available in bulk). |
|
|
Camie
22/80 Natural Citrus Cleaner
22/80, created out of concern for the environment, is a natural citrus cleaner unusually
effective as a mold cleaner as well as for removal of adhesives, grease, oil
stains, road tar, rubber marks, residue from decals, heel marks, graffiti, lipstick,
release agents, and even soap film. Use where chlorinated solvents are not
recommended. Can be used safely on most substrates, including painted surfaces,
glass, porcelain, concrete, and is compatible with some plastics. Safer than many
products, and can be water removed. Leaves no residue or film.
Packaging: Sold in 20 fl. oz. cans (15 oz. net weight); 12
cans/case (also available in bulk). |
|
|
Camie
22/90 Heavy Duty Cleaner/Degreaser
22/90 does not contain any chlorinated solvents. It is recommended for heavy duty
cleaning and degreasing jobs when effectiveness and strong action are needed to accomplish
the task. This product is useful on machinery, floors, work areas, and for
degreasing metal parts. It is not recommended for use on electrical components,
contacts, or on a running motor.
Packaging: Sold in 20 fl. oz. cans (14.25 oz. net weight); 12
cans/case (also available in bulk). |
|
|
Camie
3000 Rust Penetrant with Teflon®*
3000 is an all purpose penetrant, moisture displacer, rust
preventer, lubricant and cleaner. Compare it to WD-40®. 3000 protects bare metal against rust and corrosion
for up to six months of indoor storage. 3000 is also an excellent lubricant and
penetrant. Now a new formula with Teflon® added for even better
lubrication. This all purpose product is an invaluable part of any plant operation
and tool kit. Independent tests show Camie performs better
than most popular brands in depth of penetration, speed and lubrication.
Packaging: Sold in 16 fl. oz. cans (11 oz. net weight); 12
cans/case (also available in bulk). * Teflon® is a
registered trademark by Dupont®. |
|
|
Camie
1680 Economy 3% Silicone Release Agent
1680 is a universal silicone type release agent recommended for injection, RIM, rotational
molders, extruders and vacuum formers. This product can be used with all common
resins. This silicone, and all others, may interfere with a post-decorating step.
Care should be taken when needing to paint, hot stamp, vacuum metalize or glue
(testing should be performed). Silicone release agents generally are recognized as
effective for releasing hard-to-work resins. In addition to being a release agent,
silicones are excellent general purpose lubricants for a variety of industrial
applications.
Packaging: Sold in 16 fl. oz. cans (9 oz. net weight); 12
cans/case (not available in bulk). |
|
|
Camie
1780 Economy Paintable Release Agent
1780 is designed to be the most economical paintable release agent we offer, while being
particularly suited for all thermoplastic resins and waxes where post decorating is
required of the part being molded. This product should not interfere with painting,
hot stamping, gluing or vacuum metalizing. Always test this product in your
application to insure compatibility. If difficulty is encountered, parts can be
cleaned with a mild detergent and water or a mild solvent.
Packaging: Sold in 16 fl. oz. cans (9 oz. net weight); 12
cans/case (not available in bulk). |
|
|
Camie 1880
Economy Lecithin Release Agent
1880 is recommended as a mold release for all types of injection and compression molded
plastics. Finished parts can be hot stamped, printed, metalized or painted. It
does not build up on mold cavities. Use sparingly, a thin film is all that's needed.
1880 does not migrate or drift through the air. It has been found to be
useful as a welder's anti-spatter spray.
Packaging: Sold in 16 fl. oz. cans (9.25 oz. net weight); 12
cans/case (not available in bulk). |
|
