|

|
PLASTIC
SERVICES
& EQUIPMENT
|
 |
|
Mica Heater Bands
Manufactured from Top Quality
Mica Insulation & Materials
Standard
Mica Heater Bands
Economical Mica Heater Bands
Adjustable Mica Heater Bands

Click Here
for Technical Information About Mica Heater Bands
Heater Band Configurations:
Type A
Barrel Nut Strap
Metal braid leads exit from both sides of gap.
|
Type B
Barrel Nut Strap
Non-metal braid leads exit from both sides of gap.
|
Type C
Barrel Nut Strap
Leads exit from one side of gap through outside surface of heater.
Options: 1, 2, 3
|
Type D
Barrel Nut Strap
Leads exit from edge on opposite side from gap.
Options: 2, 3
|
Type E
Barrel Nut Strap
Leads exit from each side of gap through inside.
Options: 3

|
Type F
Flange Lock-up
Leads exit from both sides of gap through edge.
Options: 2, 3
|
Type G
Barrel Nut Strap
Metal braid leads exit from edge on one side of gap.

|
Type H
Barrel Nut Strap
1 pc.; One post terminal on each side of gap.

|
Type I
Barrel Nut Strap
2 pc.; Post terminals at each end of heater.

|
Type J
Barrel Nut Strap
1 pc.; Two post terminals on one side of gap.
|
Type K
Barrel Nut Strap
2 pc.; Two post terminals on each side of gap.
|
Type L
Barrel Nut Strap
Expandable.
Options: 1, 2, 3, 16

|
Type M
Barrel Nut Strap
Cushioned clamping strap partially covers heater.
Options: 1, 2, 3, 16

|
Type N
Flange Lock-up
1 pc.; Leads exit from one side of gap through outside surface of heater.
Options: 1, 2, 3

|
Type O
Flange Lock-up
2 pc.; Leads exit from both sides of gap through outside surface of heater.
Options: 1, 2, 3

|
Type P
Tapered Wedge Lock
Leads exit from both sides of gap through edge.
Options: 2, 3
|
Type Q
Flange Lock-up
Hinged; Post terminals at each end of heater.
|
Type R
Flange Lock-up
Hinged; Two post terminals on each side of gap.
|
Type S
Flange Lock-up
Hinged; Leads exit from both sides of gap through outside surface of heater.
|
Type T
Flange Lock-up
1 pc.; One post terminal on each side of gap.
|
Type U
Flange Lock-up
2 pc.; Post terminals at each end of heater.
|
Type V
Flange Lock-up
1 pc.; Two post terminals on one side of gap.
|
Type W
Flange Lock-up
2 pc.; Two post terminals on each side of gap.
|
Type X
Extended Flange with Electrical Connections
1 pc.; Options: 1, 2, 3, 16
|
Type Y
Extended Flange with Electrical Connections
2 pc.; Options: 1, 2, 3, 16
|
Type Z
Hexagonal Band Heater
Leads exit from both sides of gap through edges.
|
|
|
Optional Features: |
- Flexible armor (BX) installed over flexible leads.
- Metal braid installed over flexible leads.
- Flexible leads (asbestos and fiberglass insulated nickel or nickel-clad conductor)
installed with 2" fiberglass boot.
- Low profile band, presized for slip fit by installation of punch lock straps.
- Terminal box.
- Flexible armor in right angle bracket.
- Thermocouple hole.
- Button terminals.
|
- Appliance pins.
- Twist lock plug installed on leads.
- Extra wide gap (specify).
- Grounding stud.
- Dual voltage.
- Stainless steel sheath.
- Low profile strap (specify this option only if desired on sizes where not normally
supplied).
- Post terminals.
|
|
|
| Standard Mica Heater Bands
Click Here
to View Part Numbers and Specifications |

|
|
|
Economical
Mica Heater Bands
Economical Mica Heater Bands are designed primarily for nozzle and narrow width sizes.
The primary design difference between the economical and the standard mica bands is
the thinness of the economical bands. This reduction in thickness not only
contributes to the more economical pricing, but actually makes for a better heater (in the
smaller sizes) by conforming more readily to the component being heated. Economical
Mica Heater Bands are available with all of the standard options and designs available on
our Standard line of bands, and carry the same 1-year limited warranty.
Click Here to View Part Numbers and Specifications
|
 |
|
Adjustable
Mica Heater Bands
Adjustable 2-pc. construction allows use of this band with a variety of I.D. sizes.
- A good substitute for hard-to-find metric sizes.
- Easy on/off -- other bands do not need to be removed for installation.
- Dual voltage options for wiring flexibility.
- Special barrel nut strap adjusts to fit a wider variety of I.D. sizes.
Click Here to View Part Numbers and Specifications
|
 |
|
PS&E heater bands are comparable with the following brands: Acrolab,
Akinsun, ASB, Arico, Baba, Chetan, Chromalox, DElta, EZ Heat, Fast Heat, Gaumer,
Glenn Electric, Heaton, Hitco, Hot Set, Hotwatt, HTS, Industrial Heater,
Marathon, Navbharat, Ogden, Pratik, Pro Heat, Seema, Tempco, Thermal, Thermal
Devices, Watlow.

Your Next Barrel
or Screw Is Probably On Our Shelf...
Call Today To Check Our Inventory!
Home
|
Request
A Quote | Place An Order | Product
Index
Barrels & Screws
| Electrical Products
| Hose & Fittings | Molding Accessories
About PS&E | Terms
& Conditions | Credit
Application
Contact Us
| Request A Catalog
| Online
Catalog
PLASTIC SERVICES
& EQUIPMENT
800-627-1033
Fax: 800-482-4059 | E-mail: sales@plasticservices.com |
Address: 7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Contact Webmaster regarding content or link problems.
© Copyright 2009. Plastic Services & Equipment. All Rights Reserved.